Get-OVLogicalInterconnectPortMonitoring
Syntax
Get-OVLogicalInterconnectPortMonitoring
[-InputObject] <Object>
[-ApplianceConnection <Array>]
[<CommonParameters>]
Description
Port monitoring enables you to send a copy of every Ethernet or Fibre Channel frame coming in and going out of a downlink (server-facing) port to another port. To evaluate network traffic between ports, you can connect debugging equipment, such as a network analyzer. This capability is important in a server environment where there is limited physical access to the network interfaces on the servers.
Use this Cmdlet to get the current port monitoring configuration from a specified logical interconnect resource.
NOTE:
- You cannot use Virtual Connect to forward captured traffic to a server. For more information, see the HPE Virtual Connect for c-Class BladeSystem User Guide in the Hewlett Packard Enterprise Information Library.
- You can configure one network analyzer port (the uplink port) for up to 16 downlink server ports within a logical interconnect.
- The HPE Virtual Connect 16Gb 24-Port Fibre Channel Module monitors 1 downlink server port.
- HPE Virtual Connect 16Gb 24-Port Fibre Channel Module firmware must be 4.00 or later
Info
Minimum required privileges: Network administrator
Examples
Example 1
Get-OVLogicalInterconnect -Name "Encl1-Default VC FF LIG" -ErrorAction Stop | Get-OVLogicalInterconnectPortMonitoring
Get the port monitoring configuration from the specified Logical Interconnect.
Parameters
-ApplianceConnection <Array>
Specify one or more [HPEOneView.Appliance.Connection] object(s) or Name property value(s).
| Aliases | Appliance |
|---|---|
| Required? | False |
| Position? | Named |
| Default value | (${Global:ConnectedSessions} | ? Default) |
| Accept pipeline input? | true (ByPropertyName) |
| Accept wildcard characters? | False |
-InputObject <Object>
HPEOneView.Networking.LogicalInterconnect from Get-OVLogicalInterconnect.
| Aliases | uri, li, name, Resource |
|---|---|
| Required? | True |
| Position? | Named |
| Default value | |
| Accept pipeline input? | true (ByValue) |
| Accept wildcard characters? | False |
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216)
Input Types
Logical Interconnect resource object from Get-OVLogicalInterconnect
Return Values
The current port monitor configuration of the provided logical interconnect(s).