Set-OVEnclosureGroup

Syntax

Set-OVEnclosureGroup
    [-InputObject] <Object>
    [-LogicalInterconnectGroupMapping] <Object>
    [-Name <String>]
    [-PowerRedundantMode <String>]
    [-IPv4AddressType <String>]
    [-IPv4AddressRange <Object>]
    [-IPv6AddressType <String>]
    [-IPv6AddressRange <Object>]
    [-DeploymentNetworkType <String>]
    [-DeploymentNetwork <Object>]
    [-ApplianceConnection <Object>]
    [<CommonParameters>]

Description

An enclosure group is a logical resource that defines a standard configuration for member logical enclosures. Use this Cmdlet to update the configuration policy for a specific enclosure group resource.

Info

Minimum required privileges: Server administrator or Infrastructure administrator

Examples

Example 1

$EnclosureGroup = Get-OVEnclosureGroup -Name ProdEG1 -ErrorAction Stop Set-OVEnclosureGroup -InputObject $EnclosureGroup -Name VirtProdEG1

Change the name of the provided enclosure group resource.

Example 2

$UpdatedConfigScript = 'REMOVE USER "admin"
ADD USER "ops" "*********"
SET USER CONTACT "ops" "MySecretPassword"
SET USER FULLNAME "ops" ""
SET USER ACCESS "ops" OPERATOR
ASSIGN SERVER 1-16 "ops"
ENABLE USER "ops"
hponcfg all >> end_marker
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="ops" PASSWORD="passthrough">
    <USER_INFO MODE="write">
        <ADD_USER
        USER_NAME="ops"
        USER_LOGIN="ops"
        PASSWORD="Supersecretpassword">
            <ADMIN_PRIV value ="N"/>
            <REMOTE_CONS_PRIV value ="Y"/>
            <RESET_SERVER_PRIV value ="N"/>
            <VIRTUAL_MEDIA_PRIV value ="N"/>    
            <CONFIG_ILO_PRIV value="Yes"/>
        </ADD_USER>
    </USER_INFO>
</LOGIN>
</RIBCL>
end_marker' Get-OVEnclosureGroup -Name EG1 -ErrorAction Stop | Set-OVEnclosureGroup -ConfigurationScript $UpdatedConfigScript

Update the configuration script of the provided enclosure group.

Parameters

-ApplianceConnection <Object>

Specify one or more [HPEOneView.Appliance.Connection] object(s) or Name property value(s).

Aliases	Appliance
Required?	False
Position?	Named
Default value	(${Global:ConnectedSessions} | ? Default)
Accept pipeline input?	true (ByPropertyName)
Accept wildcard characters?	False

-ConfigurationScript <String>

An Onboard Administrator CLI Script. Only applicable for HPE BladeSystem C-Class.

Aliases	None
Required?	True
Position?	Named
Default value
Accept pipeline input?	false
Accept wildcard characters?	False

-InputObject <Object>

An enclosure group resource from Get-OVEnclosureGroup.

Aliases	EnclosureGroup
Required?	True
Position?	Named
Default value
Accept pipeline input?	true (ByValue)
Accept wildcard characters?	False

-Name <String>

Specify a new resource name.

Aliases	None
Required?	True
Position?	Named
Default value
Accept pipeline input?	false
Accept wildcard characters?	False

-PowerRedundantMode <String>

The Power Redundancy Mode to set when an Enclosure is added to the appliance.

Allowed Values:

• RedundantPowerFeed - Provides N+N Power Redundancy Configuration
• RedundantPowerSupply - Provided N+1 Power Redundancy Configuration

Aliases	None
Required?	True
Position?	Named
Default value
Accept pipeline input?	false
Accept wildcard characters?	False

-DeploymentNetworkType <String>

Specify the Synergy Image Stream deployment network type. Allowed values:

• Internal - Deployment network is an internal, managed by the Frame links, which Logical Intercoonect Group must have an ImageStreamer Uplink Set.
• External - Deployment network is connected to an External management switch.
• None - No deployment network will be configured.

Default: None

Aliases	None
Required?	False
Position?	Named
Default value	None
Accept pipeline input?	false
Accept wildcard characters?	False

-DeploymentNetwork <Object>

The Ethernet Network with the purpose property set to Management. Must also include DeploymentNetworkType parameter, value must be "External", with the Ethernet Network associated with a non-ImageStreamer Uplink Set.

Aliases	None
Required?	False
Position?	Named
Default value
Accept pipeline input?	false
Accept wildcard characters?	False

-IPv4AddressRange <Object>

The IPv4 address pool object from Get-OVAddressPoolRange.

Aliases	AddressPool
Required?	False
Position?	Named
Default value
Accept pipeline input?	false
Accept wildcard characters?	False

-IPv4AddressType <String>

Use to specify how the IPv4 Addresses will be assigned to Synergy resources management interface(s). Allowed values:

• External - The IPv4 address is managed externally, static assignment.
• DHCP - The IPv4 address is assigned using DHCP.
• AddressPool - The IPv4 address is assigned from a pool of IP addresses specified by the AddressPool parameter, similar to HPE BladeSystem C-Class "Enclosure Bay IP Addressing" (aka EBIPA).

Default: DHCP

Aliases	None
Required?	False
Position?	Named
Default value	DHCP
Accept pipeline input?	false
Accept wildcard characters?	False

-IPv6AddressRange <Object>

The IPv6 address pool object from Get-OVAddressPoolRange.

Aliases	None
Required?	False
Position?	Named
Default value
Accept pipeline input?	false
Accept wildcard characters?	False

-IPv6AddressType <String>

Use to specify how the IPv6 Addresses will be assigned to Synergy resources management interface(s). Allowed values:

• External - The IPv4 address is managed externally, static assignment.
• DHCP - The IPv4 address is assigned using DHCP.
• AddressPool - The IPv4 address is assigned from a pool of IP addresses specified by the AddressPool parameter, similar to HPE BladeSystem C-Class "Enclosure Bay IP Addressing" (aka EBIPA).

Default: None

Aliases	None
Required?	False
Position?	Named
Default value
Accept pipeline input?	false
Accept wildcard characters?	False

-LogicalInterconnectGroupMapping <Object>

An Enclosure Group can reference multiple Logical Interconnect Groups, once per Interconnect Bay. If a Single Logical Interconnect Group object is provided (either via parameter variable or via Pipeline), the Logical Interconnect Group objects Logical Interconnect Bay configuration will be used.

To specify a specific C-Class Logical Interconnect Group(s) for one or more Interconnect Bays, use a Hashtable, with the Bay ID as the Key, and Logical Interconnect Group Name, URI or Object as the Value. Example:

$LogicalInterConnectGroupMapping = @{ 1 = "MyLIg1"; 2 = "MyLig1"; 5 = "OtherLIG"; 6 = "OtherLIG"}

$MyLig1 = Get-OVLogicalInterconnectGroup -Name MyLig1 $OtherLIG = Get-OVLogicalInterconnectGroup OtherLIG $LogicalInterConnectGroupMapping = @{ 1 = $MyLig1; 2 = $MyLig1; 5 = $OtherLIG; 6 = $OtherLIG"

When attempting to define a Syenrgy-based Enclosure Group, either an Array or Hashtable is allowed. If an Array of Logical Interconnect Groups are provided, the Cmdlet will determine the Interconnect placement automatically. Example:

$MySynergyLig1 = Get-OVLogicalInterconnectGroup -Name MySynergyLig1 $LogicalInterConnectGroupMapping = $MySynergyLig1

or

$MySynergyLig1 = Get-OVLogicalInterconnectGroup -Name MySynergyLig1 $MySynergyLig2 = Get-OVLogicalInterconnectGroup -Name MySynergyLig2 $LogicalInterConnectGroupMapping = $MySynergyLig1,$MySynergyLig2

Do know that SAS and VC FC LIGs are bound to a single frame, and will not reference other Frames if FrameCount is greater than 1.

Use a Hashtable to bind specific LIGs to specific Frames. The Interconnect placement will be determined automatically based on either the Hashtable Key name "Frame#" (where # is the numerical value of the Frame) or Enclosure Index value (depending if a SAS or Synergy VC FC LIG). Example:

$3FrameVCLIG = Get-OVLogicalInterconnectGroup -Name "My MultiFrame Synergy LIG 1" $SasLIG = Get-OVLogicalInterconnectGroup -Name "My Synergy Sas LIG 1" $LogicalInterconnectGroupMapping = @{Frame1 = $3FrameVCLIG,$SasLIG; Frame2 = $3FrameVCLIG,$SasLIG; Frame3 = $3FrameVCLIG }

Aliases	logicalInterconnectGroupUri, logicalInterconnectGroup
Required?	True
Position?	Named
Default value
Accept pipeline input?	true (ByValue)
Accept wildcard characters?	False

<CommonParameters>

This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216)

Input Types

HPEOneView.Servers.EnclosureGroup [System.Management.Automation.PSCustomObject]

Enclosure group resource from Get-OVEnclosureGroup.

Return Values

HPEOneView.Servers.EnclosureGroup [System.Management.Automation.PSCustomObject]

The updated enclosure group resource.

Related Links

• Get-OVEnclosureGroup
• New-OVEnclosureGroup
• Remove-OVEnclosureGroup