HPE EZMERAL CONTAINER PLATFORM 5.1 AND HPE EZMERAL DATA FABRIC ON HPE SYNERGY AND HPE APOLLO 4200 GEN10 SERVERS

# Solution Physical Components

This section outlines the hardware, software, and service components utilized in this solution.

# Hardware

Figure 4 shows the physical configuration of the racks used in this solution.

Figure 4. Physical layout of the solution

The configuration outlined in this document is based on the design guidance of an HPE Converged Architecture 750 foundation model which offers an improved time to deployment and tested firmware recipe. The recipe can be retrieved at https://psnow.ext.hpe.com/doc/a00101684en_us. It is strongly recommended that the installation user utilizes the latest available matrix. Hewlett Packard Enterprise has tested this solution with the latest firmware recipe available as of June 2020, including HPE OneView for Synergy 5.2.

The installation user has the flexibility to customize the HPE components throughout this stack in accordance with the unique IT and workload requirements or to build the solution with individual components rather than using HPE CS750.

Table 1 highlights the individual components and their quantities as deployed within the solution.

Table 1. Components utilized in the creation of this solution

For more information on systems requirements, see http://docs.bluedata.com/51_system-requirements-overview

# Software

Table 2 describes the software versions utilized in the creation of this solution. The installation user should ensure that they download or have access to this software. Ensure that the appropriate subscription and licensing are in place to use within the planned time frame.

Table 2. Major software versions used in the creation of this solution

Table 3. Software installed on the installer machine

NOTE

The latest sub-version of each component listed in Table 2 and 3 should be installed.

# Services

This document is built with assumptions about services and network ports available within the implementation environment. This section discusses those assumptions.

Table 4 disseminates the services required in this solution and provides a high-level explanation of their function.

Table 4. Services used in the creation of this solution

← Physical Environment Configuration →