# Storage Options
# Alletra/Nimble Storage
# HPE CSI Driver Architecture
A diagramatic representation of the HPE CSI driver architecture is illustrated in the figure 10.
Figure 10: CSI Driver Architecture
The OpenShift Container Platform 4.14 cluster comprises the master and worker nodes (physical and virtual) with CoreOS deployed as the operating system. The iSCSI interface configured on the host nodes establishes the connection with the HPE Alletra array to the cluster. Upon successful deployment of HPE CSI Driver, the CSI controller, CSI Driver, and 3PAR CSP and Nimble CSP gets deployed which communicates with the HPE Alletra array via REST APIs. The associated features on Storage Class such as CSI Provisioner, CSI Attacher, and others are configured on the Storage Class.
# Deploying HPE CSI Driver for HPE Alletra storage on RHOCP 4.14
This section describes how to deploy HPE CSI Driver for HPE Alletra storage on an existing RHOCP 4.14.
Prerequisites:
Before configuring the HPE CSI Driver, the following prerequisites must be met:
RHOCP 4.14 must be successfully deployed, and console should be accessible.
iSCSI interface must be configured on the HPE Alletra Storage array. For more information, see the Infrastructure Master Reference Architecture based on HPE Alletra 6000.
Additional iSCSI network interfaces must be configured on physical worker nodes.()
Deploy scc.yaml file to enable Security Context Constraints (SCC).
Configuring iSCSI interface on worker nodes
The RHOCP 4.14 cluster comprises the master and physical worker nodes with RHEL 8.8 deployed as the operating system. The iSCSI interface is configured on the host nodes to establish the connection with the HPE Alletra array to the cluster. Apart from the host nodes, additional iSCSI interface needs to be configured on all the worker (physical and virtual) nodes for establishing the connection between the RHOCP cluster and HPE Alletra arrays.
To configure iSCSI interface on physical RHEL worker nodes:
- Configure iSCSI A connection as a storage interface and iSCSI B connection as an additional storage for redundancy
For example, the iSCSI_A and iSCSI_B interface connection is configured on worker1 node, as shown in Figure 11.
FIGURE 11 iSCSI_A and iSCSI_B interface connection
Creating namespace
To create a namespace, in this case, hpe-csi:
Open Red Hat OpenShift Container Platform Console on a supported web browser.
Click Administration → Namespaces on the left pane.
Click Create Namespaces.
On the Create Namespace dialog box, enter hpe-csi.
Click Create.
Deploying Security Context Constraints (SCC)
The HPE CSI Driver needs to run in the privileged mode to get access to the host ports, host network, and to mount the host path volume. Before deploying HPE CSI Driver operator on RHOCP cluster, deploy SCC to allow HPE CSI Driver to run with these privileges.
Prerequisites:
- Ensure that you can access the scc.yaml file from the following GitHub link:
To deploy SCC:
- On the installer VM, download scc.yaml file from the GitHub link using the following command:
$ curl -sL https://raw.githubusercontent.com/hpe-storage/co-deployments/master/operators/hpe-csi-operator/deploy/scc.yaml > hpe-csi-scc.yaml
Edit relevant parameters such as project name or namespace in the hpe-csi-scc.yaml file.
Change my-hpe-csi-operator to the name of the project (in this case, hpe-csi) where the CSI Operator is being deployed using the following command:
$ oc new-project hpe-csi --display-name="HPE CSI Driver for Kubernetes"
$ sed -i'' -e 's/my-hpe-csi-driver-operator/hpe-csi/g' hpe-csi-scc.yaml
- Save the file.
The following figure illustrates the parameter that needs to be edited (project name) where the HPE CSI Driver operator is deployed:
FIGURE 12: Editing hpe-cs-scc.yaml file
- Deploy SCC using the following command and check the output:
$ oc create -f hpe-csi-scc.yaml
The following output is displayed:
securitycontextconstraints.security.openshift.io/hpe-csi-scc created
Installing and configuring HPE CSI Driver
NOTE
HPE CSI Driver version 2.4 is used for deploying HPE Alletra Storage on the RHOCP 4.14.
Prerequisites:
Before installing the HPE CSI Driver from the Red Hat OpenShift Container Platform Console:
- Create a namespace for HPE CSI Driver
- Deploy SCC for the created namespace
Installing HPE CSI Driver Operator using Red Hat OperatorHub
To install HPE CSI Driver Operator from the Red Hat OperatorHub:
Log in to the Red Hat OpenShift Container Platform Console.
Navigate to Operators → OperatorHub.
Search for HPE CSI Driver Operator from the list of operators and click HPE CSI Driver Operator.
On the HPE CSI Operator for Kubernetes page, click Install.
FIGURE 13: HPE CSI Driver Operator search
On the Create Operator Subscription page, select the appropriate options:
Select "A specific namespace on the cluster" in the Installation Mode option.
Select the appropriate namespace (in this case, hpe-csi) in the Installed Namespace option.
Select "stable" in the Update Channel option.
Select "Automatic" in the Approval Strategy option.
FIGURE 14: Create Operator Subscription
- Click Install.
The Installed Operators page is displayed with the status of the operator.
FIGURE 15: Installed Operators
Creating HPE CSI Driver
The HPE CSI Driver is a multi-vendor and multi-backend driver where each implementation has a Container Storage Provider (CSP). The HPE CSI Driver for Kubernetes uses CSP to perform data management operations on storage resources such as searching for a logical unit number (lun) and so on. The HPE CSI Driver allows any vendor or project to develop its own CSP using the CSP specification. It enables the third parties to integrate their storage solution into Kubernetes and takes care of all the intricacies.
To create the HPE CSI Driver:
Log in to the Red Hat OpenShift Container Platform Console.
Navigate to Operators → Installed Operators on the left pane to view the installed operators.
On the Installed Operators page, select HPECSIDriver from the Project drop-down list to switch to the hpe-csi project.
On the hpe-csi project, select HPECSIDriver tab.
Click Create HPECSIDriver.
Click Create.
FIGURE 16: HPE CSI Driver creation
Verifying HPECSIDriver configuration
After the HPECSIDriver is deployed, the deployment pods such as hpe-csi-controller, hpe-csi-driver, primera3par-csp, and Nimble-csp are displayed on the Pods page.
FIGURE 17: Deployment pods for HPECSIDriver
NOTE
The Nimble Storage CSP also supports HPE Alletra 6000.
To verify the HPE CSI node information:
- On the installer VM, check HPENodeInfo and network status of worker nodes with the following commands.
$ oc get HPENodeInfo
$ oc get HPENodeInfo/<workernode fqdn> -o yaml
The following output is displayed:
FIGURE 18: HPENodeInfo on the cluster
Creating HPE Alletra StorageClass
After HPE CSI Driver is deployed, two additional objects, Secret and StorageClass, must be created to initiate the provisioning of persistent storage.
Creating Alletra Secret
To create a new Secret via CLI that will be used with HPE Alletra:
- Add the name, Namespace, backend username, backend password and the backend IP address in the Alletra-secret.yaml file and save it to be used by the CSP.
The following details are provided in the Alletra-secret.yaml file:
apiVersion: v1
kind: Secret
metadata:
name: alletra-secret
namespace: hpe-csi
stringData:
serviceName: alletra-csp-svc
servicePort: "8080"
backend: alletramgmtip # update alletramgmt ip
username: admin
password: admin
- Create the Alletra-secret.yaml file with the following command:
$ oc create -f Alletra-secret.yaml
- The following output displays the status of the alletra-secret with the "hpe-csi" namespace.
FIGURE 19: HPE Alletra Secret status
Creating StorageClass with HPE Alletra Secret
This section describes how to create a new StorageClass using the existing Alletra-secret and the necessary StorageClass parameters.
To create a new StorageClass using the Alletra-secret:
- Edit the following parameters in the Alletra-storageclass.yaml file:
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
annotations:
storageclass.kubernetes.io/is-default-class: "true"
name: Alletra-storageclass
provisioner: csi.hpe.com
parameters:
csi.storage.k8s.io/fstype: xfs
csi.storage.k8s.io/controller-expand-secret-name: alletra-secret
csi.storage.k8s.io/controller-expand-secret-namespace: hpe-csi
csi.storage.k8s.io/controller-publish-secret-name: alletra-secret
csi.storage.k8s.io/controller-publish-secret-namespace: hpe-csi
csi.storage.k8s.io/node-publish-secret-name: alletra-secret
csi.storage.k8s.io/node-publish-secret-namespace: hpe-csi
csi.storage.k8s.io/node-stage-secret-name: alletra-secret
csi.storage.k8s.io/node-stage-secret-namespace: hpe-csi
csi.storage.k8s.io/provisioner-secret-name: alletra-secret
csi.storage.k8s.io/provisioner-secret-namespace: hpe-csi
description: "Volume created by the HPE CSI Driver for Kubernetes"
reclaimPolicy: Delete
allowVolumeExpansion: true
- Create the Alletra-storageclass.yml file with the following command:
$ oc create -f Alletra-storageclass.yml
- Verify the name of the storage class (in this case, Alletra-storageclass).
FIGURE 20: HPE Alletra StorageClass status
# Deploying Openshift Data Foundation
This section covers deploying OpenShift Data Foundation 4.14 on existing Red Hat OpenShift Container Platform 4.14 worker nodes.
The OpenShift Data Foundation operator installation will be using Local Storage operator which will use file system storage of 10GB for monitoring purpose and block storage of 500GB/2TB for OSD (Object Storage Daemon) volumes. These OSD are useful for configuring any application on top of OCP cluster using ODF configuration.
Figure 21. Logical storage Layout in Solution
The below operators are required to create ODF cluster and deployed through automation fashion.
Local Storage Operator
OpenShift Data Foundation Operator
# Flow Diagram
Figure 22. Deploying OpenShift Container Storage Solution Flow Diagram
# Configuration requirements
The below table shows about all required worker node configuration.
| Server Role | CPU | RAM | HardDisk1 | HardDisk2 | HardDisk3 |
|---|---|---|---|---|---|
| Worker | 16 | 64 | 120 GB | 10 GB | 500 GB/2 TB |
# Pre-requisites
Red Hat OpenShift Container Platform 4.14 cluster console is required with the login credentials.
Availability of any local storage from any storage (i.e Nimble,Alletra,Local Storage) in OpenShift Container Platform.
ODF installation on OCP 4.14 cluster requires a minimum of 3 worker nodes but ODF should have exact 3 worker nodes which use two more hard disks with 10GB for mon POD (3 in total using always a PVC) + 500GB (or more than 500GB) volume (a PVC using the default "thin" storage class) for the OSD volumes. It also requires 16 CPUs and 64GB RAM for each node and worker node hard disk configuration as shown in above figure.
# Scripts for deploying ODF cluster
NOTE
BASE_DIR - is a base directory path for all automated scripts directories are in place and path is /opt/hpe-solutions-openshift/DL-LTI-Openshift/
This section provides details on the scripts developed to automate the installation of ODF operator on the OCP cluster. The scripts used to deploy ODF can be found in the installer VM at $BASE_DIR/odf_installation.
install_odf_operator.py - main python script which installs Local Storage operator, OpenShift Container Storage operators, creates file system & block storage and also creates SCs, PVs, PVCs.
config.py - This python script is used to convert user input values into program variables for usage by the install_odf_operator.py script.
userinput.json - The userinput.json file needs to be modified as per user configuration and requirements for installing and scaling ODF cluster.
create_local_storage_operator.yaml -- Creates Local Storage operator's Namespace, installs Local Storage operator.
auto_discover_devices.yaml -– Creates the LocalVolumeDiscovery resource using this file.
localvolumeset.yaml -– Creates the LocalVolumeSets
odf_operator.yaml -- This playbook creates OpenShift Container Storage Namespace and OpenShift Data Foundation Operator.
storagecluster.yaml -– This playbook creates storage classes, PVCs (Persistent Volume Claim), pods to bring up the ODF cluster.
# Installing OpenShift Container Storage on OpenShift Container Platform
Login to the installer machine as non-root user and browse to python virtual environment as per DG.
Update the userinput.json file is found at $BASE_DIR/odf_installation with the following setup configuration details:
OPENSHIFT_DOMAIN: "<OpenShift Server sub domain fqdn (api.domain.base_domain)>", OPENSHIFT_PORT: "<OpenShift Server port number (OpenShift Container Platform runs on port 6443 by default)>", LOCAL_STORAGE_VERSION": "<OCP_cluster_version>", OPENSHIFT_CONTAINER_STORAGE_VERSION": "", OPENSHIFT_CLIENT_PATH: "<Provide oc absolute path ending with / OR leave empty in case oc is available under /usr/local/bin>", "OPENSHIFT_CONTAINER_PLATFORM_WORKER_NODES": <Provide OCP worker nodes fqdn list ["sworker1.fqdn", "sworker2.fqdn","worker3.fqdn"]>, "OPENSHIFT_USERNAME": "", "OPENSHIFT_PASSWORD": "", "DISK_NUMBER": ""Execute the following command to deploy ODF cluster.
> cd $BASE_DIR/odf_installation> python -W ignore install_odf_operator.pyThe output of the above command as shown below:
> python -W ignore install_odf_operator.pyEnter key for encrypted variables: Logging into your OpenShift Cluster Successfully logged into the OpenShift Cluster Waiting for 1 minutes to 'Local Storage' operator to be available on OCP web console..!! 'Local Storage' operator is created..!! Waiting for 2 minutes to OCS operator to be available on OCP web console..!! 'OpenShift Container Storage' operator is created..!! INFO: 1) Run the below command to list all PODs and PVCs of OCS cluster. 'oc get pod,pvc -n openshift-storage' 2) Wait for 'pod/ocs-operator-xxxx' pod to be up and running. 3) Log into OCP web GUI and check Persistant Stoarge in dashboard. $
# Validation of the OpenShift Data Foundation cluster
The required operators will be created after the execution of the script and they will be reflected in the OpenShift console. This section outlines the steps to verify the operators created through script and are reflected in the GUI:
Login to the OpenShift Container Platform web console as the user with administrative privileges.
Navigate to Operators -> Project (local-storage) -> Installed Operators select your project name.
The Openshift data foundation operator will be available in the OpenShift web console as shown in below Figure.
Navigate to Operators -> Installed Operators select your project name openshift-storage for OpenShift Container Storage operator.
The OpenShift Container Storage operator will be available on the OpenShift Container Platform web console as shown in below Figure.
SCs of OpenShift Data Foundation operator on CLI as shown in below.
> oc get scNAME PROVISIONER RECLAIMPOLICY VOLUMEBINDINGMODE ALLOWVOLUMEEXPANSION AGE local-sc kubernetes.io/no-provisioner Delete WaitForFirstConsumer false 45h localblock-sc kubernetes.io/no-provisioner Delete WaitForFirstConsumer false 45h odf-storagecluster-ceph-rbd openshift-storage.rbd.csi.ceph.com Delete Immediate false 45h odf-storagecluster-cephfs openshift-storage.cephfs.csi.ceph.com Delete Immediate false 45h openshift-storage.noobaa.io openshift-storage.noobaa.io/obc Delete Immediate false 45hPVs of OpenShift Data Foundation operator on CLI as shown in below.
> oc get pvNAME CAPACITY ACCESS MODES RECLAIM POLICY STATUS CLAIM STORAGECLASS REASON AGE local-pv-2febb788 500Gi RWO Delete Bound openshift-storage/odf-deviceset-1-0-lhtvh localblock-sc 45h local-pv-5f19c0e5 10Gi RWO Delete Bound openshift-storage/rook-ceph-mon-b local-sc 45h local-pv-b73b1cd5 500Gi RWO Delete Bound openshift-storage/odf-deviceset-2-0-jmmck localblock-sc 45h local-pv-b8ba8c38 10Gi RWO Delete Bound openshift-storage/rook-ceph-mon-a local-sc 45h local-pv-c3a372f6 10Gi RWO Delete Bound openshift-storage/rook-ceph-mon-c local-sc 45h local-pv-e5e3d596 500Gi RWO Delete Bound openshift-storage/odf-deviceset-0-0-5jxg7 localblock-sc 45h pvc-8f3e3d8b-6be7-4ba8-8968-69cbc866c89f 50Gi RWO Delete Bound openshift-storage/db-noobaa-db-0 ocs-storagecluster-ceph-rbd 45h $PVCs of OpenShift Data Foundation operator on CLI as shown in below.
> oc get pvc -n openshift-storageNAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE db-noobaa-db-0 Bound pvc-8f3e3d8b-6be7-4ba8-8968-69cbc866c89f 50Gi RWO odf-storagecluster-ceph-rbd 45h odf-deviceset-0-0-5jxg7 Bound local-pv-e5e3d596 500Gi RWO localblock-sc 45h odf-deviceset-1-0-lhtvh Bound local-pv-2febb788 500Gi RWO localblock-sc 45h odf-deviceset-2-0-jmmck Bound local-pv-b73b1cd5 500Gi RWO localblock-sc 45h rook-ceph-mon-a Bound local-pv-b8ba8c38 10Gi RWO local-sc 45h rook-ceph-mon-b Bound local-pv-5f19c0e5 10Gi RWO local-sc 45h rook-ceph-mon-c Bound local-pv-c3a372f6 10Gi RWO local-sc 45h $PODs of OpenShift Data Foundation operator on CLI as shown in below.
> oc get pod -n openshift-storageNAME READY STATUS RESTARTS AGE csi-cephfsplugin-6xpsk 3/3 Running 0 45h csi-cephfsplugin-7khm6 3/3 Running 0 17m csi-cephfsplugin-bb48n 3/3 Running 0 45h csi-cephfsplugin-cfzx6 3/3 Running 0 15m csi-cephfsplugin-provisioner-79587c64f9-2dpm6 5/5 Running 0 45h csi-cephfsplugin-provisioner-79587c64f9-hf46x 5/5 Running 0 45h csi-cephfsplugin-w6p6v 3/3 Running 0 45h csi-rbdplugin-2z686 3/3 Running 0 45h csi-rbdplugin-6tv5m 3/3 Running 0 45h csi-rbdplugin-jgf5z 3/3 Running 0 17m csi-rbdplugin-provisioner-5f495c4566-76rqm 5/5 Running 0 45h csi-rbdplugin-provisioner-5f495c4566-pzvww 5/5 Running 0 45h csi-rbdplugin-v7lfx 3/3 Running 0 45h csi-rbdplugin-ztdjs 3/3 Running 0 15m noobaa-core-0 1/1 Running 0 45h noobaa-db-0 1/1 Running 0 45h noobaa-endpoint-6458fc874f-vpznd 1/1 Running 0 45h noobaa-operator-7f4495fc6-lmk9k 1/1 Running 0 45h odf-operator-5d664769f-59v8j 1/1 Running 0 45h rook-ceph-crashcollector-sworker1.socp.twentynet.local-84dddddb 1/1 Running 0 45h rook-ceph-crashcollector-sworker2.socp.twentynet.local-8b5qzzsz 1/1 Running 0 45h rook-ceph-crashcollector-sworker3.socp.twentynet.local-699n9kzp 1/1 Running 0 45h rook-ceph-drain-canary-sworker1.socp.twentynet.local-85bffzm66m 1/1 Running 0 45h rook-ceph-drain-canary-sworker2.socp.twentynet.local-66bcfjjfkr 1/1 Running 0 45h rook-ceph-drain-canary-sworker3.socp.twentynet.local-5f6b57c9nt 1/1 Running 0 45h rook-ceph-mds-ocs-storagecluster-cephfilesystem-a-67fbb67dkb4kz 1/1 Running 0 45h rook-ceph-mds-ocs-storagecluster-cephfilesystem-b-db66df7dtqkmx 1/1 Running 0 45h rook-ceph-mgr-a-6f5f7b58dc-fjvjc 1/1 Running 0 45h rook-ceph-mon-a-76cc49c944-5pcgf 1/1 Running 0 45h rook-ceph-mon-b-b9449cdd7-s6mct 1/1 Running 0 45h rook-ceph-mon-c-59d854cd8-gn6sd 1/1 Running 0 45h rook-ceph-operator-775cd6cd66-sdfph 1/1 Running 0 45h rook-ceph-osd-0-7644557bfb-9l7ns 1/1 Running 0 45h rook-ceph-osd-1-7694c74948-lc9sf 1/1 Running 0 45h rook-ceph-osd-2-794547558-wjcpz 1/1 Running 0 45h rook-ceph-osd-prepare-ocs-deviceset-0-0-5jxg7-t89zh 0/1 Completed 0 45h rook-ceph-osd-prepare-ocs-deviceset-1-0-lhtvh-f2znl 0/1 Completed 0 45h rook-ceph-osd-prepare-ocs-deviceset-2-0-jmmck-wsrb2 0/1 Completed 0 45h rook-ceph-rgw-ocs-storagecluster-cephobjectstore-a-67b7865qx276 1/1 Running 0 45h $Storage capacity of ODF cluster with 3 worker nodes (3x500Gi) on OCP web cluster as shown below figure.
# Validating ODF with deploying WordPress application
This section covers the steps to validate the OpenShift Data Foundation deployment (ODF) by deploying 2-tier application along with MySQL database.
Prerequisites
OCP 4.14 cluster must be installed.
ODF to claim persistent volume (PV).
# Deploying WordPress application
NOTE
BASE_DIR - is a base directory path for all automated scripts directories are in place and path is /opt/hpe-solutions-openshift/DL-LTI-Openshift
Login to the installer machine as a non-root user.
From within the repository, navigate to the WordPress script folder
> cd $BASE_DIR/odf_installation/wordpressRun below script to deploy Wordpress application along with MySQL
> ./deploy_wordpress.sh
The deploy_wordpress.sh scripts does the following activities.
Creates project
Sets default storage class
Deploys Wordpress and MySQL app
Create routes
Below is the output of the scripts
> ./deploy_wordpress.shOutput of the command follows:
Already on project "wordpress" on server "https://api.socp.twentynet.local:6443". You can add applications to this project with the 'new-app' command. For example, try: oc new-app ruby~https://github.com/sclorg/ruby-ex.git to build a new example application in Ruby. Or use kubectl to deploy a simple Kubernetes application: kubectl create deployment hello-node --image=gcr.io/hello-minikube-zero-install/hello-node Already on project "wordpress" on server "https://api.socp.twentynet.local:6443". clusterrole.rbac.authorization.k8s.io/system:openshift:scc:anyuid added: "default"error: --overwrite is false but found the following declared annotation(s): 'storageclass.kubernetes.io/is-default-class' already has a value (true) service/wordpress-http created service/wordpress-mysql created persistentvolumeclaim/mysql-pv-claim created persistentvolumeclaim/wp-pv-claim created secret/mysql-pass created deployment.apps/wordpress-mysql created deployment.apps/wordpress created route.route.openshift.io/wordpress-http created URL to access application wordpress-http-wordpress.apps.socp.twentynet.local $
# Verifying the WordPress deployment
Execute the following command to verify the persistent volume associated with WordPress application and MySQL database.
> oc get pods,pvc,route -n wordpressNAME READY STATUS RESTARTS AGE pod/wordpress-6f69797b8f-hqpss 1/1 Running 0 5m52s pod/wordpress-mysql-8f4b599b5-cd2s2 1/1 Running 0 5m52sNAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE persistentvolumeclaim/mysql-pv-claim Bound pvc-ccf2a578-9ba3-4577-8115-7c80ac200a9c 5Gi RWO ocs-storagecluster-ceph-rbd 5m50s persistentvolumeclaim/wp-pv-claim Bound pvc-3acec0a0-943d-4138-bda9-5b57f8c35c5d 5Gi RWO ocs-storagecluster-ceph-rbd 5m50sNAME HOST/PORT PATH SERVICES PORT TERMINATION WILDCARD route.route.openshift.io/wordpress-http wordpress-http-wordpress.apps.socp.twentynet.local wordpress-http 80-tcp None $Access the route url in browser to access the WordPress application as shown below.
